Hustler CM156

Gearbox Drives

Over rated sealed gearboxes are used on both bed and cross floors for more power, quicker daily startup times and more reliability.

Tried & True Control System

The Combi CM Range comes standard with the original Combi control system which has taken more than 4 decades to perfect providing the operator with full control over each floor for more versatility when feeding bales or chopped feeds.

Other control choices are available as optional extras.

Toughest Chains & Drives

From the toughest twin 12,000lb roller chains, to the bis-alloy sprockets the new CM range is built to handle the heaviest loads with ease.

View Through Visibility

See right through to the rear of the machine and into the cross floor with no obstructions blocking your view.

Toughest Feed Bars On The Market

We’ve gone to a larger RHS feed bar, giving maximum torsional strength with a lower profile for the best of both world’s.

Strongest Axles On The Market

Toughest axle design with massive 2,200 cm2 of pivot surface area and 100 mm diameter pivot pins means you’ll never be repairing an axle again.

Single Post Draw Bar with Massive Link Arm Clearance

Combi CM provides superior maneuverability and linkage arm clearance thanks to Hustler’s unique draw bar design. The new design weighs the load both when on the jack and attached to the tractor without the need to fold and unfold a parking stand.

Adjustable Chain Tensioners

All chains have adjustable tensioners with easy access for long life and simple servicing.

Self-Aligning Bearings

Combi CM features self-aligning bearings instead of bushes for longer service intervals, more reliability and lower maintenance.

Single Elevator Ram

Combi CM uses a single elevator tilt ram to eliminate twisting, reduce maintenance and they’re mounted out of harms way from debris and from silage juices damaging the seals.

Bale String Tie Points

Integrated tie points along the length of the wagon to tie bale strings.

Scale Ready

2.46 times stronger than the old design, the unique design of Combi CM’s load cell integration makes adding scales easier and with fewer load cells there’s wiring, fewer electronics and less to go wrong.

Removable Draw Bar Eye

With a bolted drawbar eye Combi CM is designed to suit your preferred hitch type, be it a fixed eye, swiveling, clevis, or spoon type. And with huge clearance, it works just as well with pickup hitches.

Protected Motor Drives

Protected for safety and reliability the hydraulic motors are shielded.

Protected Hydraulics & Electrics

Simple hydraulic and electric component design for reliability the valves are protected from the elements beneath an easy access cover.

Low Maintenance Elevator Fans

The new Combi CM has just one set of elevator spillage fans for simplicity and with clever Hustler innovation, we’ve managed to reduce the number of fans for the required tilt angle reducing maintenance and eliminating 14 wearing parts from the design!

Auto Release Tailgate

New to the Combi CM range is an Auto-release tailgate which allows the operator to eject loads out the rear of the machine without leaving the tractor cab. It also eliminates tailgate damage should the operator accidentally reverse the load.

Tool-less Tailgate Removal

Clever Hustler engineering has design the tail gate for tool-less removal. And the integrated fork pockets make for safe and easy handling.

Covered Shafts

Driveshafts are covered to eliminate feed material from wrapping around shafts.

Load Dividing Design

Combi CM’s load dividing design reduces the load on all drives making for a longer-lasting machine. And because the floors travel less per load they don’t wear out like other wagons.

Integrated Access Ladder

Equipped as standard Combi CM comes with an access ladder built-in, providing easy access when removing bale strings.

Industry Best Visibility Into Wagon and Elevator

See exactly what you’re feeding from the comfort of your seat, no other wagon provides this much visibility.

Hose Holder

An integrated hose holder comes standard to minimize the possibility of hoses chaffing and downtime.

Feedpad Kit Standard

Now standard equipment the Combi CM range, come feed pad ready to eliminate the unnecessary spillage or the tyre from running over the feed row.

Cable & Hose Tracks

Cable and hose tracks are built into the design as standard to protect them from the possibility of damage.

Central Greasing

Central greasing now comes standard on Combi CM for the axle and difficult to access grease points.

Bisalloy Sprockets

Bisalloy is built for earth moving cutting edges, Combi CM uses Bis-alloy sprockets for reliability.

Built-in Mudguards

Mudguards come as standard and are tapered to prevent the build-up of material when loading.

Optional Road Visibility Kit

The optional road visibility kit includes front & rear hazard panels, front & rear LED lights, and safety chains.