Anderson Group RB580

Double tap to zoom

Loading arm that rotates the bale and loads it onto the wrapper. It allows the operator to load the bale and wrap it while moving to the next.
Bale receiver 3 positions, deposits the bale on the ground, on one of the two sides or standing. It unloads the bale to the right, to the left or to the rear when you wrap on a slope, will let it roll gently directly to the ground.
Electronic bale counter.
Designed for field wrapping, it can follow the baler with its loading arm.
Manual wrapping process via the hydraulic controls of the tractor
Mechanical plastic cutting system that holds the plastic in place and automatically cuts it at the end of the cycle.

Bales
Round bale diameter	Up ton6' (1,8 m)
Round bale length	Up ton5' (1,5 m)
Square bale	n/a
Wrapping speed	Up ton40 bales/h
Wrapping process	Manual
Mode	Pulled behind
Specification
Aluminum film stretcher	1 × 30" (750 mm)
Bale dumper	2 positions
Bale guides rollers	Standard
Leveling system	N/A
Road lights	For tractor
Night Work lights	N/A
Tires	26 x 12-12 (300/60-12)
High floatation Tires	Standard
Plastic cut & hold system	Mechanical
Self-loading arm	Standard
Electronic bale counter	Standard
Tractor Minimum Hydraulic Flow	9 gal/min (30 litres/min)
Tractor Minimum Hydraulic Pressure	2201 psi
Dimensions
Overall width - B	15 ft 7 in (4,77 m)
Overall height - C	8 ft 5 in (2,56 m)
Overall length - A	9 ft 8 in (2,98 m)
Overall weight	1680 kg (3703 lb)