-
Merna, NE
PH: 308-643-7212
View Map
Anderson Group A700FD
Features
- Capacity 695
- Reinforced tub fl oor provides longevity of the tub and also to the load cells by equalizing the weight uniformly.
- TRI-CUT™, auger with 2-position adjustable and reversible knives (10 standard) and 2 sweeping dispensers ensuring a 30% faster and more consistent discharge.
- Discharge options: Side trap or front conveyor.
- Carbide treated self-sharpening tungsten knives.
- Industry’s fi rst hydraulic TRUE-CUT™ restrictor blades allows the operator to engage and disengage during the mixing process preventing all risks of overprocessing feed.
- The DG500 indicator is a universal, programmable weighing indicator for recipes, dispensing and data storage. It guarantees an extremely precise weighing thanks to the protected load cells and strategically located under the tank. Compatible with the DTM suite.
- 4-point scale system.
- Rolled side walls (not bent) for better fl ow of material, avoiding restriction around auger and naturally increased sturdiness.
- SMART CONTROL remote control (optional) provides you full wireless control to: customize weighing system and recipe, hydraulics, speed of belt etc.
- Optional 2 speed gearbox.
Specifications
Capacity | |
Capacity (no capacity extension) | 700 ft3 (19.8 m3) |
6 in capacity extension | 770 ft3 (21.8 m3) |
12 in capacity extension | 840 ft3 (23.8 m3) |
18 in capacity extension | 910 ft3 (25.8 m3) |
Number of Auger | 2 |
Dimensions | |
Length (A) | 309 in (7.86 m) |
Height (B) no extension | 110 in (2.79 m) |
6 in capacity extension | 116 in (2.95 m) |
12 in capacity extension | 121 in (3.07 m) |
18 in capacity extension | 128 in (3.25 m) |
Hay retention ring (additionnal height) | 0 in / 3,5 in |
Without incline conveyor | 101 in (2.57 m) |
With incline conveyor (retracted) | 117 in (2.97 m) |
Incline conveyor operating angle (degrees) | 26 @ 39 |
Outside width of the wheels | 100 in (2.54 m) |
Incline conveyor 3 ft at min.26 angle /max 40 | 28 in (0.7 m) / 25 in (0.63 m) |
Incline conveyor 4 ft at min. 26 angle /max 40 | 49 in (1.24 m)/ 56 in (1.43 m) |
Incline conveyor 5 ft at min. 26 angle /max 40 | 56 in (1.42 m)/ 67 in (1.69 m) |
Incline conveyor 6 ft at min. 26 angle /max 40 | 60 in (1.53 m)/ 73 in (1.85 m) |
Incline conveyor 7 ft at min. 26 angle /max 40 | 67 in (1.71 m)/ 83 in (2.12 m) |
Incline conveyor 8 ft at min. 26 angle /max 40 | 71 in (1.81 m)/ 90 in (2.28 m) |
Incline conveyor 3 ft at min. 26 angle /max 40 | 45 in (1.14 m)/ 50 in (1.27 m) |
Floor ST (E1) / Conveyor FD (E2) to ground | 34 in (0.86 m) |
Specifications | |
PTO shaft - Standard specification | 1000 RPM?1" 3/8 Z21 |
PTO shaft - Option specification | 1000 RPM?1"3/4 Z20?540 RPM?1" 3/8 Z6 |
2 speed Gear Box | Optional |
2 Speed Gear Box and ratio | C3A-R, 1;1,5 540 RPM?C3A-R, 1,8;2,7 1000 RPM |
Minimum PTO HP Requirement - Low Speed | 100 |
Minimum PTO HP Requirement - High Speed | 150 |
Auger RPM - Low Speed | 27 RPM |
Auger RPM - Standard High speed | 41 RPM |
Standard planetary model and ratio configuration | 2003 @25.89 |
Optionnal Planetary | 2002 @ 13.4 540 RPM |
Floor Thickness (AR235 grade) | 3/4 in |
Sidewall Thickness (AR235 grade) | 1/4 in |
Flighting Thickness (AR235 grade) | 5/8 in |
Standard knives per auger | 6 / 10 optional |
Driveline security | Shear bolt |
Hydraulic flow requirement | 10-15 US gal/ min?37-56 L/ min |
Hydraulic pressure | 160-200 bars?(2300-2900 psi) |
Load cell | 4 |
Scale system | DG500 (standard)? |
Machine Weight (empty) - STD configuration | 17 117 lb (7763 kg) |
Utility load capacity | 20 300 lb (9206 kg) |
Axle - Standard specifications | Single |
Axle - Optional specifications | Tandem |
Wheels - Standard specifications | 275/70R22.5 (DOUBLE) |