-
Merna, NE
PH: 308-643-7212
View Map
Anderson Group A520ST
Features
- Capacity 520
- Reinforced tub floor provides longevity of the tub and also to the load cells by equalizing the weight uniformly.
- TRI-CUT™, auger with 2-position adjustable and reversible knives (10 standard) and 2 sweeping dispensers ensuring a 30% faster and more consistent discharge.
- Discharge options: Side trap or front conveyor.
- Carbide treated self-sharpening tungsten knives.
- Industry’s first hydraulic TRUE-CUT™ restrictor blades allows the operator to engage and disengage during the mixing process preventing all risks of over-processing feed.
- The DG500 indicator is a universal, programmable weighing indicator for recipes, dispensing and data storage. It guarantees an extremely precise weighing thanks to the protected load cells and strategically located under the tank. Compatible with the DTM suite.
- 3-point scale system.
- Rolled side walls (not bent) for better fl ow of material, avoiding restriction around auger and naturally increased sturdiness.
- SMART CONTROL remote control (optional) provides you full wireless control to: customize weighing system and recipe, hydraulics, speed of belt etc.
- Optional 2 speed gearbox.
Specifications
Capacity | |
Capacity (no capacity extension) | 520 ft3 (14.7 m3) |
6 in capacity extension | 574 ft3 (16.3 m3) |
12 in capacity extension | 628 ft3 (17.8 m3) |
18 in capacity extension | 682 ft3 (19.3 m3) |
Number of Auger | 2 |
Dimensions | |
Length (A) | 242 in (6.15 m) |
Height (B) no extension | 102 in (2.59 m) |
6 in capacity extension | 108 in (2.74 m) |
12 in capacity extension | 114 in (2.9 m) |
18 in capacity extension | 120 in (3.05 m) |
Hay retention ring (additionnal height) | 0 in / 3,5 in |
Without incline conveyor | 101 in (2.57 m) |
With incline conveyor (retracted) | 115 in (2.92 m) |
Incline conveyor operating angle (degrees) | 226 @39 degrees |
Outside width of the wheels | 99 in (2.51 m) |
Incline conveyor 3 ft at min.26 angle /max 40 | 22 in (0.57 m) / 20 in (0.51 m) |
Incline conveyor 4 ft at min. 26 angle /max 40 | 42 in (1.06 m)/ 51 in (1.29 m) |
Incline conveyor 5 ft at min. 26 angle /max 40 | 48 in (1.21 m)/ 61 in (1.54 m) |
Incline conveyor 6 ft at min. 26 angle /max 40 | 52 in (1.31 m)/ 67 in (1.70 m) |
Incline conveyor 7 ft at min. 26 angle /max 40 | 58 in (1.47 m)/ 77 in (1.96 m) |
Incline conveyor 8 ft at min. 26 angle /max 40 | 62 in (1.57 m)/ 84 in (2.12 m) |
Incline conveyor 3 ft at min. 26 angle /max 40 | 38 in (0.96 m)/ 44 in (1.13 m) |
Floor ST (E1) / Conveyor FD (E2) to ground | 34 in (0.85 m) |
Specifications | |
PTO shaft - Standard specification | 540 RP m?1" 3/8 Z6 |
PTO shaft - Option specification | 1000 RP m?1" 3/8 Z21 |
2 speed Gear Box | Optional |
2 Speed Gear Box and ratio | C3A-R, 1;1,5 540 RPM?C3A-R, 1,8;2,7 1000 RPM |
Minimum PTO HP Requirement - Low Speed | 80 |
Minimum PTO HP Requirement - High Speed | 120 |
Auger RPM - Low Speed | 27 RPM |
Auger RPM - Standard High speed | 41 RPM |
Standard planetary model and ratio configuration | 1602 @13.4 |
Optionnal Planetary | N/A |
Floor Thickness (AR235 grade) | 5/8 in |
Sidewall Thickness (AR235 grade) | 1/4 in |
Flighting Thickness (AR235 grade) | 5/8 in |
Standard knives per auger | 6 / 10 optional |
Driveline security | Shear bolt |
Hydraulic flow requirement | 10-15 US gal/ m in?37-56 L/ m in |
Hydraulic pressure | 160-200 bar?(2300-2900 psi) |
Load cell | 3 |
Scale system | DG500 (standard) |
Machine Weight (empty) - STD configuration | 11 744 lb (5326 kg) |
Utility load capacity | 15 080 lb (6839 kg) |
Axle - Standard specifications | Single |
Axle - Optional specifications | N/A |
Wheels - Standard specifications | 385/65R22.5-20 |