-
Merna, NE
PH: 308-643-7212
View Map
Anderson Group A950FD
Features
- Capacity 953
- Reinforced tub fl oor provides longevity of the tub and also to the load cells by equalizing the weight uniformly.
- TRI-CUT™, auger with 2-position adjustable and reversible knives (10 standard) and 2 sweeping dispensers ensuring a 30% faster and more consistent discharge.
- Discharge options: front conveyor, rear trap optional.
- Carbide treated self-sharpening tungsten knives.
- Industry’s fi rst hydraulic TRUE-CUT™ restrictor blades allows the operator to engage and disengage during the mixing process preventing all risks of over-processing feed.
- The DG500 indicator is a universal, programmable weighing indicator for recipes, dispensing and data storage. It guarantees an extremely precise weighing thanks to the protected load cells and strategically located under the tank. Compatible with the DTM suite.
- 6-point scale system.
- Rolled side walls (not bent) for better fl ow of material, avoiding restriction around auger and naturally increased sturdiness.
- SMART CONTROL remote control (optional) provides you full wireless control to: customize weighing system and recipe, hydraulics, speed of belt etc.
- Standard 2 speed gearbox.
Specifications
Capacity | |
Capacity (no capacity extension) | 920 ft3 (26.1 m3) |
6 in capacity extension | 1017 ft3 (28.8 m3) |
12 in capacity extension | 1114 ft3 (31.6 m3) |
18 in capacity extension | 1211 ft3 (34.3 m3) |
Number of Auger | 3 |
Dimensions | |
Length (A) | 385 in (9.77 m) |
Height (B) no extension | 117 in (2.97 m) |
6 in capacity extension | 123 in (3.12 m) |
12 in capacity extension | 129 in (3.28 m) |
18 in capacity extension | 135 in (3.43 m) |
Hay retention ring (additionnal height) | 0 in / 3,5 in |
Without incline conveyor | 101 in (2.57 m) |
With incline conveyor (retracted) | 117 in (2.97 m) |
Incline conveyor operating angle (degrees) | 26 @39 |
Outside width of the wheels | 101 in (2.57 m) |
Incline conveyor 3 ft at min.26 angle /max 40 | 28 in (0.7 m)/ 25 in (0.63 m) |
Incline conveyor 4 ft at min. 26 angle /max 40 | 50 in (1.26 m)/ 57 in (1.45 m) |
Incline conveyor 5 ft at min. 26 angle /max 40 | 57 in (1.44 m)/ 68 in (1.72 m) |
Incline conveyor 6 ft at min. 26 angle /max 40 | 61 in (1.55 m)/ 74 in (1.88 m) |
Incline conveyor 7 ft at min. 26 angle /max 40 | 68 in (1.73 m)/ 84 in (2.14 m) |
Incline conveyor 8 ft at min. 26 angle /max 40 | 72 in (1.83 m)/ 90 in (2.30 m) |
Incline conveyor 3 ft at min. 26 angle /max 40 | 46 in (1.16 m)/ 51 in (1.29 m) |
Floor ST (E1) / Conveyor FD (E2) to ground | 35 in (0.88 m) |
Specifications | |
PTO shaft - Standard specification | 1000 RPM?1" 3/8 Z21 |
PTO shaft - Option specification | 1000 RPM?1" 3/4 Z20 |
2 speed Gear Box | Standard |
2 Speed Gear Box and ratio | A613R, 1,8;2,7 @ 2spd |
Minimum PTO HP Requirement - Low Speed | 120 |
Minimum PTO HP Requirement - High Speed | 180 |
Auger RPM - Low Speed | 27 RPM |
Auger RPM - Standard High speed | 41 |
Standard planetary model and ratio configuration | 2102 @13.54 |
Optionnal Planetary | N/A |
Floor Thickness (AR235 grade) | 3/4 in |
Sidewall Thickness (AR235 grade) | 1/4 in |
Flighting Thickness (AR235 grade) | 5/8 in |
Standard knives per auger | 6 / 10 optional |
Driveline security | Shear bolt |
Hydraulic flow requirement | 10-15 US gal/ min?37-56 L/ min |
Hydraulic pressure | 160-200 bars?(2300-2900 psi) |
Load cell | 6 |
Scale system | DG500 (standard) |
Machine Weight (empty) - STD configuration | 23 460 lb (10639 kg) |
Utility load capacity | 26 680 lb (12100 kg) |
Axle - Standard specifications | Tandem |
Axle - Optional specifications | N/A |
Wheels - Standard specifications | 445/45R19,5 |