-
Merna, NE
PH: 308-643-7212
View Map
Anderson Group A280
Features
- Capacity 282 cu3 to 367 cu3
- Reinforced tub fl oor provides longevity of the tub and also to the load cells by equalizing the weight uniformly.
- TRI-CUT™, auger with 2-position adjustable and reversible knives (10 standard) and 2 sweeping dispensers ensuring a 30% faster and more consistent discharge.
- Side trap discharge designed with a sloped fl oor. Optional magnet can be installed as well. Side trap can also be equip with inclined conveyor.
- Carbide treated self-sharpening tungsten knives.
- Industry’s fi rst hydraulic TRUE-CUT™ restrictor blades allows the operator to engage and disengage during the mixing process preventing all risks of over-processing feed.
- The DG500 indicator is a universal, programmable weighing indicator for recipes, dispensing and data storage. It guarantees an extremely precise weighing thanks to the protected load cells and strategically located under the tank. Compatible with the DTM suite.
- 3-point scale system.
- Rolled side walls (not bent) for better fl ow of material, avoiding restriction around auger and naturally increased sturdiness.
- SMART CONTROL remote control (optional) provides you full wireless control to: customize weighing system and recipe, hydraulics, speed of belt etc.
Specifications
Capacity | |
Capacity (no capacity extension) | 280 ft3 (7.9 m3) |
6 in capacity extension | 316 ft3 (9 m3) |
12 in capacity extension | 352 ft3 (10 m3) |
18 in capacity extension | 388 ft3 (11 m3) |
Number of Auger | 1 |
Dimensions | |
Length (A) | 176 in (4.46 m) |
Height (B) no extension | 98 in (2.49 m) |
6 in capacity extension | 104 in (2.64 m) |
12 in capacity extension | 110 in (2.79 m) |
18 in capacity extension | 116 in (2.95 m) |
Hay retention ring (additionnal height) | 0 in / 3,5 in |
Without incline conveyor | 90 in (2.29 m) |
With incline conveyor (retracted) | 106 in (2.69 m) |
Incline conveyor operating angle (degrees) | 26 @39 degrees |
Outside width of the wheels | 86 in (2.18 m) |
Incline conveyor 3 ft at min.26 angle /max 40 | 29 in (0.73 m) / 26 in (0.66 m) |
Incline conveyor 4 ft at min. 26 angle /max 40 | 40 in (1.01 m) / 47 in (1.2 m) |
Incline conveyor 5 ft at min. 26 angle /max 40 | 47 in (1.19 m) / 57 in (1.46 m) |
Incline conveyor 6 ft at min. 26 angle /max 40 | 51 in (1.3 m) / 64 in (1.61 m) |
Incline conveyor 7 ft at min. 26 angle /max 40 | 58 in (1.48 m) / 74 in (1.87 m) |
Incline conveyor 8 ft at min. 26 angle /max 40 | 63 in (1.59 m) / 80 in (2.03 m) |
Incline conveyor 3 ft at min. 26 angle /max 40 | 36 in (0.9 m) / 41 in (1.04 m) |
Floor ST (E1) / Conveyor FD (E2) to ground | 30 in (0.77 m) |
Specifications | |
PTO shaft - Standard specification | 540 RP m?1" 3/8 Z6 |
PTO shaft - Option specification | N/A |
2 speed Gear Box | N/A |
2 Speed Gear Box and ratio | N/A |
Minimum PTO HP Requirement - Low Speed | N/A |
Minimum PTO HP Requirement - High Speed | 60 |
Auger RPM - Low Speed | N/A |
Auger RPM - Standard High speed | 41 RPM |
Standard planetary model and ratio configuration | 1602 @13.4 |
Optionnal Planetary | N/A |
Floor Thickness (AR235 grade) | 5/8 in |
Sidewall Thickness (AR235 grade) | 1/4 in |
Flighting Thickness (AR235 grade) | 5/8 in |
Standard knives per auger | 6 / 10 optional |
Driveline security | Shear bolt |
Hydraulic flow requirement | 10-15 US gal/ m in?37-56 L/ m in |
Hydraulic pressure | 160-200 bar?(2300-2900 psi) |
Load cell | 3 |
Scale system | DG500 (standard) |
Machine Weight (empty) - STD configuration | 7067 lb (3205 kg) |
Utility load capacity | 8120 lb (3683 kg) |
Axle - Standard specifications | Single |
Axle - Optional specifications | N/A |
Wheels - Standard specifications | 15.0/55-17 26 PLY |